Finding center of mass on x y plane

Let’s begin by looking at the center of mass in a one-dimensional context. Consider a long, thin wire or rod of negligible mass resting on a fulcrum, as shown in Figure 1(a). Now suppose we place objects having masses [latex]_[/latex] and [latex]_[/latex] at distances [latex]_[/latex] and [latex]_[/latex] from the fulcrum, respectively, as shown in Figure 1(b).

This figure has two images. The first image is a horizontal line on top of an equilateral triangle. It represents a rod on a fulcrum. The second image is the same as the first with two squares on the line. They are labeled msub1 and msub2. The distance from msub1 to the fulcrum is dsub1. The distance from msub2 to the fulcrum is dsub2.

Figure 1. (a) A thin rod rests on a fulcrum. (b) Masses are placed on the rod.

The most common real-life example of a system like this is a playground seesaw, or teeter-totter, with children of different weights sitting at different distances from the center. On a seesaw, if one child sits at each end, the heavier child sinks down and the lighter child is lifted into the air. If the heavier child slides in toward the center, though, the seesaw balances. Applying this concept to the masses on the rod, we note that the masses balance each other if and only if [latex]__=__.[/latex]

In the seesaw example, we balanced the system by moving the masses (children) with respect to the fulcrum. However, we are really interested in systems in which the masses are not allowed to move, and instead we balance the system by moving the fulcrum. Suppose we have two point masses, [latex]_[/latex] and [latex]_,[/latex] located on a number line at points [latex]_[/latex] and [latex]_,[/latex] respectively (Figure 2). The center of mass, [latex]\overline,[/latex] is the point where the fulcrum should be placed to make the system balance.

This figure is an image of the x-axis. On the axis there is a point labeled x bar. Also on the axis there is a point xsub1 with a square above it. Inside of the square is the label msub1. There is also a point xsub2 on the axis. Above this point there is a square. Inside of the square is the label msub2.

Figure 2. The center of mass [latex]\overline[/latex] is the balance point of the system.

The expression in the numerator, [latex]__+__,[/latex] is called the first moment of the system with respect to the origin. If the context is clear, we often drop the word first and just refer to this expression as the moment of the system. The expression in the denominator, [latex]_+_,[/latex] is the total mass of the system. Thus, the center of mass of the system is the point at which the total mass of the system could be concentrated without changing the moment.

This idea is not limited just to two point masses. In general, if [latex]n[/latex] masses, [latex]_,_\text,_,[/latex] are placed on a number line at points [latex]_,_\text,_,[/latex] respectively, then the center of mass of the system is given by

[latex]\overline=\frac<\underset<\overset>>__><\underset<\overset>>_>.[/latex]

Center of Mass of Objects on a Line

Let [latex]_,_\text,_[/latex] be point masses placed on a number line at points [latex]_,_\text,_,[/latex] respectively, and let [latex]m=\underset<\overset>>_[/latex] denote the total mass of the system. Then, the moment of the system with respect to the origin is given by

[latex]M=\displaystyle\sum_^ __[/latex]

and the center of mass of the system is given by

[latex]\overline=\frac.[/latex]

We apply this theorem in the following example.

Example: Finding the Center of Mass of Objects along a Line

Suppose four point masses are placed on a number line as follows:

Find the moment of the system with respect to the origin and find the center of mass of the system.

Show Solution

First, we need to calculate the moment of the system:

[latex]\begin\hfill M& = ^__>\hfill \\ & =-60+15+60-45=-30.\hfill \end[/latex]

Now, to find the center of mass, we need the total mass of the system:

[latex]\begin\hfill m& = ^_> \hfill \\ & =30+5+10+15=60\text\text\hfill \end[/latex] [latex]\overline=\frac=\frac=-\frac.[/latex]

The center of mass is located 1/2 m to the left of the origin.

Try It

Suppose four point masses are placed on a number line as follows:

Find the moment of the system with respect to the origin and find the center of mass of the system.

Use the process from the previous example. Show Solution

We can generalize this concept to find the center of mass of a system of point masses in a plane. Let [latex]_[/latex] be a point mass located at point [latex](_,_)[/latex] in the plane. Then the moment [latex]_[/latex] of the mass with respect to the [latex]x[/latex]-axis is given by [latex]_=__.[/latex] Similarly, the moment [latex]_[/latex] with respect to the [latex]y[/latex]-axis is given by [latex]_=__.[/latex] Notice that the [latex]x[/latex]-coordinate of the point is used to calculate the moment with respect to the [latex]y[/latex]-axis, and vice versa. The reason is that the [latex]x[/latex]-coordinate gives the distance from the point mass to the [latex]y[/latex]-axis, and the [latex]y[/latex]-coordinate gives the distance to the [latex]x[/latex]-axis (see the following figure).

This figure has the x and y axes labeled. There is a point in the first quadrant at (xsub1, ysub1). This point is labeled msub1.

Figure 3. Point mass [latex]_[/latex] is located at point [latex](_,_)[/latex] in the plane.

If we have several point masses in the xy-plane, we can use the moments with respect to the [latex]x[/latex]– and [latex]y[/latex]-axes to calculate the [latex]x[/latex]– and [latex]y[/latex]-coordinates of the center of mass of the system.

Center of Mass of Objects in a Plane

Let [latex]_,_\text,_[/latex] be point masses located in the xy-plane at points [latex](_,_),(_,_)\text,(_,_),[/latex] respectively, and let [latex]m=\underset<\overset>>_[/latex] denote the total mass of the system. Then the moments [latex]_[/latex] and [latex]_[/latex] of the system with respect to the [latex]x[/latex]– and [latex]y[/latex]-axes, respectively, are given by

[latex]_=\underset<\overset>>__\text< and >_=\underset<\overset>>__.[/latex]

Also, the coordinates of the center of mass [latex](\overline,\overline)[/latex] of the system are

[latex]\overline=\frac_>\text< and >\overline=\frac_>.[/latex]

The next example demonstrates how to apply this theorem.

Example: Finding the Center of Mass of Objects in a Plane

Suppose three point masses are placed in the xy-plane as follows (assume coordinates are given in meters):

[latex]\begin_=2\text(-1,3),\hfill \\ _=6\text(1,1),\hfill \\ _=4\text(2,-2).\hfill \end[/latex]

Find the center of mass of the system.

Show Solution

First we calculate the total mass of the system:

[latex]m=\sum _^_=2+6+4=12\text\text[/latex]

Next we find the moments with respect to the [latex]x[/latex]– and [latex]y[/latex]-axes:

[latex]\begin<>\\ \\ _=\sum _^__=-2+6+8=12,\hfill \\ _=\sum _^__=6+6-8=4.\hfill \end[/latex] [latex]\overline=\frac_>=\frac=1\text< and >\overline=\frac_>=\frac=\frac.[/latex]

The center of mass of the system is [latex](1,1\text3),[/latex] in meters.

Try It

Suppose three point masses are placed on a number line as follows (assume coordinates are given in meters):

[latex]\begin_=5\text(-2,-3),\hfill \\ _=3\text(2,3),\hfill \\ _=2\text(-3,-2).\hfill \end[/latex]

Find the center of mass of the system.

Use the process from the previous example. Show Solution [latex](-1,-1)[/latex] m

Watch the following video to see the worked solution to the above Try It.

Closed Captioning and Transcript Information for Video

For closed captioning, open the video on its original page by clicking the Youtube logo in the lower right-hand corner of the video display. In YouTube, the video will begin at the same starting point as this clip, but will continue playing until the very end.

Center of Mass of Thin Plates

So far we have looked at systems of point masses on a line and in a plane. Now, instead of having the mass of a system concentrated at discrete points, we want to look at systems in which the mass of the system is distributed continuously across a thin sheet of material. For our purposes, we assume the sheet is thin enough that it can be treated as if it is two-dimensional. Such a sheet is called a lamina. Next we develop techniques to find the center of mass of a lamina. In this section, we also assume the density of the lamina is constant.

Laminas are often represented by a two-dimensional region in a plane. The geometric center of such a region is called its centroid. Since we have assumed the density of the lamina is constant, the center of mass of the lamina depends only on the shape of the corresponding region in the plane; it does not depend on the density. In this case, the center of mass of the lamina corresponds to the centroid of the delineated region in the plane. As with systems of point masses, we need to find the total mass of the lamina, as well as the moments of the lamina with respect to the [latex]x[/latex]– and [latex]y[/latex]-axes.

We first consider a lamina in the shape of a rectangle. Recall that the center of mass of a lamina is the point where the lamina balances. For a rectangle, that point is both the horizontal and vertical center of the rectangle. Based on this understanding, it is clear that the center of mass of a rectangular lamina is the point where the diagonals intersect, which is a result of the symmetry principle, and it is stated here without proof.

The Symmetry Principle

If a region R is symmetric about a line [latex]l[/latex], then the centroid of R lies on [latex]l[/latex].

Let’s turn to more general laminas. Suppose we have a lamina bounded above by the graph of a continuous function [latex]f(x),[/latex] below by the [latex]x[/latex]-axis, and on the left and right by the lines [latex]x=a[/latex] and [latex]x=b,[/latex] respectively, as shown in the following figure.

This image is a graph of y=f(x). It is in the first quadrant. Under the curve is a shaded region labeled “R”. The shaded region is bounded to the left at x=a and to the right at x=b.

Figure 4. A region in the plane representing a lamina.

As with systems of point masses, to find the center of mass of the lamina, we need to find the total mass of the lamina, as well as the moments of the lamina with respect to the [latex]x[/latex]– and [latex]y[/latex]-axes. As we have done many times before, we approximate these quantities by partitioning the interval [latex]\left[a,b\right][/latex] and constructing rectangles.

For [latex]i=0,1,2\text,n,[/latex] let [latex]P=\left\_\right\>[/latex] be a regular partition of [latex]\left[a,b\right].[/latex] Recall that we can choose any point within the interval [latex]\left[_,_\right][/latex] as our [latex]_^<*>.[/latex] In this case, we want [latex]_^<*>[/latex] to be the [latex]x[/latex]-coordinate of the centroid of our rectangles. Thus, for [latex]i=1,2\text,n,[/latex] we select [latex]_^<*>\in \left[_,_\right][/latex] such that [latex]_^<*>[/latex] is the midpoint of the interval. That is, [latex]_^<*>=(_+_)\text2.[/latex] Now, for [latex]i=1,2\text,n,[/latex] construct a rectangle of height [latex]f(_^<*>)[/latex] on [latex]\left[_,_\right].[/latex] The center of mass of this rectangle is [latex](_^<*>,(f(_^<*>))\text2),[/latex] as shown in the following figure.

This figure is a graph of the curve labeled f(x). It is in the first quadrant. Under the curve and above the x-axis there is a vertical shaded rectangle. the height of the rectangle is labeled f(xsubi). Also, xsubi = f(xsubi/2).

Figure 5. A representative rectangle of the lamina.

Next, we need to find the total mass of the rectangle. Let [latex]\rho [/latex] represent the density of the lamina (note that [latex]\rho [/latex] is a constant). In this case, [latex]\rho [/latex] is expressed in terms of mass per unit area. Thus, to find the total mass of the rectangle, we multiply the area of the rectangle by [latex]\rho .[/latex] Then, the mass of the rectangle is given by [latex]\rho f(_^)\textx.[/latex]

To get the approximate mass of the lamina, we add the masses of all the rectangles to get

[latex]m\approx \underset<\overset>>\rho f(_^)\textx[/latex]

This is a Riemann sum. Taking the limit as [latex]n\to \infty [/latex] gives the exact mass of the lamina:

[latex]m=\underset>\underset<\overset>>\rho f(_^)\textx=\rho <\displaystyle\int >_^f(x)dx[/latex]

Next, we calculate the moment of the lamina with respect to the [latex]x[/latex]-axis. Returning to the representative rectangle, recall its center of mass is [latex](_^<*>,(f(_^<*>))\text2).[/latex] Recall also that treating the rectangle as if it is a point mass located at the center of mass does not change the moment. Thus, the moment of the rectangle with respect to the [latex]x[/latex]-axis is given by the mass of the rectangle, [latex]\rho f(_^<*>)\textx,[/latex] multiplied by the distance from the center of mass to the [latex]x[/latex]-axis: [latex](f(_^<*>))\text2.[/latex] Therefore, the moment with respect to the [latex]x[/latex]-axis of the rectangle is [latex]\rho (<\left[f(_^<*>)\right]>^\text2)\textx.[/latex] Adding the moments of the rectangles and taking the limit of the resulting Riemann sum, we see that the moment of the lamina with respect to the [latex]x[/latex]-axis is

[latex]_=\underset>\underset<\overset>>\rho \frac<<\left[f(_^)\right]>^>\textx=\rho <\displaystyle\int >_^\frac<<\left[f(x)\right]>^>dx.[/latex]

We derive the moment with respect to the [latex]y[/latex]-axis similarly, noting that the distance from the center of mass of the rectangle to the [latex]y[/latex]-axis is [latex]_^.[/latex] Then the moment of the lamina with respect to the [latex]y[/latex]-axis is given by

[latex]_=\underset>\underset<\overset>>\rho _^f(_^)\textx=\rho <\displaystyle\int >_^xf(x)dx[/latex]

We find the coordinates of the center of mass by dividing the moments by the total mass to give [latex]\overline=_\textm\text< and >\overline=_\textm.[/latex] If we look closely at the expressions for [latex]_,_,\text< and >m,[/latex] we notice that the constant [latex]\rho [/latex] cancels out when [latex]\overline[/latex] and [latex]\overline[/latex] are calculated.

We summarize these findings in the following theorem.

Center of Mass of a Thin Plate in the xy-Plane

Let R denote a region bounded above by the graph of a continuous function [latex]f(x),[/latex] below by the [latex]x[/latex]-axis, and on the left and right by the lines [latex]x=a[/latex] and [latex]x=b,[/latex] respectively. Let [latex]\rho [/latex] denote the density of the associated lamina. Then we can make the following statements:

[latex]m=\rho <\displaystyle\int >_^f(x)dx.[/latex] [latex]_=\rho <\displaystyle\int >_^\frac<<\left[f(x)\right]>^>dx\text< and >_=\rho <\displaystyle\int >_^xf(x)dx.[/latex] [latex]\overline=\frac_>\text< and >\overline=\frac_>.[/latex]

In the next example, we use this theorem to find the center of mass of a lamina.

Example: Finding the Center of Mass of a Lamina

Let R be the region bounded above by the graph of the function [latex]f(x)=\sqrt[/latex] and below by the [latex]x[/latex]-axis over the interval [latex]\left[0,4\right].[/latex] Find the centroid of the region.

Show Solution

The region is depicted in the following figure.

This figure is the graph of the curve f(x)=squareroot(x). It is an increasing curve in the first quadrant. Under the curve above the x-axis there is a shaded region. It starts at x=0 and is bounded to the right at x=4.

Figure 6. Finding the center of mass of a lamina.

Since we are only asked for the centroid of the region, rather than the mass or moments of the associated lamina, we know the density constant [latex]\rho [/latex] cancels out of the calculations eventually. Therefore, for the sake of convenience, let’s assume [latex]\rho =1.[/latex]

First, we need to calculate the total mass:

Next, we compute the moments: